Air governor

[williamcharrison]

Thankd Don,
Have you ever gotten anything out of the 2 center tanks?
Is any maintenance required on the air dryer and where is it located?

>
> Chuck You can get to the governor from under the bed. It is
in the
> back of the air compressor. I changed mine last year. They are
only about
> $40.00 so it is no big deal if it hasn't been changed for a while.
I set mine to
> spit off at 120#. I think 150# is too high. You don't need that
much
> pressure.On mine the air tanks are front to back right behind the
front axle & in
> front of the fuel tank. The first one is the front brake tank. the
next is the
> air throttle & air suspension tank. These two have a valve that
can be
> drained but I have never got any thing out of them The other two
are above the pass
> thru compartment. There is a access plate that can be unscrewed &
removed.
> My tank on the curb side is the Wet tank & the one on the street
side is the
> rear brake tank.They have an expello valve that is automatic.
Hope this
> helps [4 air tanks]
> Don
> 89 SP 36'
> Butler , PA
>
>
> The bird is due to come out of storage soon and I know I have some
> extra things to work on. At the end of last year (still in good
> weather) the air pressure would build to 150psi before the
pressure
> relief would kick in via the governor. Is it best to just replace
it?
> If so what is the easiest access (remove bumper, remove fan etc)?
> Also, is it necessary to manually bleed the air tanks or does the
drier
> take care of all moisture? Also, where are the air tanks located?
>
> Chuck Harrison
> Akron, Ohio
> 90 SP36
>
>
>
>
>
>
>
> ************************************** See what's free at
http://www.aol.com.
>
>
> [Non-text portions of this message have been removed]
>