84FC35 water pump (house)

[Gregory OConnor]

Keith, I wonder if the rebuild kit would help.I think it is only for
the pump side and not the dc motor side? Building up against a head
or too much pressure would cause a big amp draw and or the
bearings/bushings in the motor are shot????? I think if the pump is
weak it would only run feewheeled too much and not be a big amp draw

GregoryO'Connor
94ptRomolandCa--- In WanderlodgeForum@yahoogroups.com, "Keith
Strehle" wrote:
>
> I know. Sorry about that. Things are coming along nicely but I
> still have a lot to do. And I suppose I'll never run out of stuff
to
> do... I really wanted a PT but couldn't justify the $$. I'll get
> there one day. My pump works okay but trips the breaker when I'm
in
> the shower and I have to stand there like a doofus for about 20
> seconds. Then it comes back on.
>
> Keith
> 84FC35
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Art Weatherly"
> wrote:
> >
> > Keith
> > Hot water never goes through the pump, just cool water out of the
> tank. You're right though, it could be over heating.
> > I just purched a '85 PT 36 and thought I had pump problems. After
> much study of the drawings I realized it was
> > cockpit trouble - forgot to restore the "fill" switch.
> >
> > Bt the way, had my phone call been 3 hours earlier you coach
would
> be mine. But everything works out - I'm happy
> > with what I got.
> >
> > Art Weatherly
> > Riverside Ca.
> > '85 PT 36
> > ----- Original Message -----
> > From: Keith Strehle
> > To: WanderlodgeForum@yahoogroups.com
> > Sent: Thursday, April 26, 2007 11:08 AM
> > Subject: [SPAM] [WanderlodgeForum] 84FC35 water pump (house)
> >
> >
> > A while back someone mentioned a $10.00 rebulid kit for the
house
> water
> > pump in my Bird. Anyone familiar with that? The pump works okay
> most
> > of the time but overloads the 12v circuit breaker, especially
> when
> > running hot water. So I'm guessing it's overheating? Thought I
> would
> > try fixing before replacing.
> >
> > Keith
> > 84FC35
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>