Drivers seat easing out of position.

[Jeff Miller]

It sounds like the air side-slide is not locking.

It is essentially a regular manual seat-slide, sitting sideways on the
swivel base, with an air-cylinder pulling the unlock lever (behind and
beneath the seat).

The air cylinder might be bound up, work the lever by hand to see.
There is a spring return on the lever also, make sure it is in place.
If simply a bound cylinder, clean the ram (shaft) with WD-40 or
equivalent and work it until free, wipe clean.

The swivel base is a large winged-rod under the left side of the seat
just above the floor.

- Jeff Miller
http://www.wanderlodge.net
http://www.millercoachworks.com


--- In WanderlodgeForum@yahoogroups.com, "bluebirdfitz"
wrote:
> The Flexsteel seat on my 78 FC slowly slides out of position after I
set. Not a bad position
> for an astronaut, but a little disconcerting on the highway. Any
ideas?
>
> John Fitz
> 78 FC 31
> Maynard MA.