Water pump (one more time)

[Ralph L. Fullenwider]

Keith:

The original pump put out 4.5 gpm @ 45 psi. Watch the gpm rate on a
shurflow pump. Some of the lower priced pumps are 45 psi but only at 2 to 3
gpm. I like my 65 psi at 5.7 gpm.

Question, have you located the breaker for your present pump? It may well
be weak. It should be in the drivers side rear load center, located in the
overhead compartment next to the 1/2 closet with the 2 drawer under it. It
will be a green/white stripe wire with #1 and going to cb 8. There may be a
spare cb in that load center that you can try moving the wire too.

Safe travels,

Ralph and Charolette Fullenwider
'84 FC35 Duncan, Oklahoma
Ralph's RV Solutions



At 04:35 PM 5/1/2007 +0000, you wrote:
>I am going to replace my water pump this weekend. There are ShurFlo
>pumps available on the shelf for about $70. The pump is supposed to
>put out 45 psi but I've heard many people here talk about the 65 psi
>pumps. 65 psi seems a little much. Is 65 psi necessary and how much
>does the original pump put out?
>
>Thanks, Keith
>84FC35
>
>

Safe travels,

Ralph and Charolette Fullenwider
'84 FC35 Duncan, Oklahoma
Ralph's RV Solutions