Water pump (one more time)

[Keith Strehle]

Thanks Ralph, I have located the breaker and can hear it when it
opens. Should I just replace the breaker? Do you know where I can
get one?

Keith
84FC


--- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider"
wrote:
>
> Keith:
>
> The original pump put out 4.5 gpm @ 45 psi. Watch the gpm rate on
a
> shurflow pump. Some of the lower priced pumps are 45 psi but only
at 2 to 3
> gpm. I like my 65 psi at 5.7 gpm.
>
> Question, have you located the breaker for your present pump? It
may well
> be weak. It should be in the drivers side rear load center, located
in the
> overhead compartment next to the 1/2 closet with the 2 drawer under
it. It
> will be a green/white stripe wire with #1 and going to cb 8. There
may be a
> spare cb in that load center that you can try moving the wire too.
>
> Safe travels,
>
> Ralph and Charolette Fullenwider
> '84 FC35 Duncan, Oklahoma
> Ralph's RV Solutions
>
>
>
> At 04:35 PM 5/1/2007 +0000, you wrote:
> >I am going to replace my water pump this weekend. There are
ShurFlo
> >pumps available on the shelf for about $70. The pump is supposed
to
> >put out 45 psi but I've heard many people here talk about the 65
psi
> >pumps. 65 psi seems a little much. Is 65 psi necessary and how
much
> >does the original pump put out?
> >
> >Thanks, Keith
> >84FC35
> >
> >
>
> Safe travels,
>
> Ralph and Charolette Fullenwider
> '84 FC35 Duncan, Oklahoma
> Ralph's RV Solutions
>