Drivers seat easing out of position.

[John Fitzsimmons]

Thanks Jeff,

The air side slide works fine. The problem is after I
set it with the electric controls: the seat and back
of the seat slide back ever so slowly.

Thanks ofr your help.

John Fitz
--- Jeff Miller wrote:
> It sounds like the air side-slide is not locking.
>
> It is essentially a regular manual seat-slide,
> sitting sideways on the
> swivel base, with an air-cylinder pulling the unlock
> lever (behind and
> beneath the seat).
>
> The air cylinder might be bound up, work the lever
> by hand to see.
> There is a spring return on the lever also, make
> sure it is in place.
> If simply a bound cylinder, clean the ram (shaft)
> with WD-40 or
> equivalent and work it until free, wipe clean.
>
> The swivel base is a large winged-rod under the left
> side of the seat
> just above the floor.
>
> - Jeff Miller
> http://www.wanderlodge.net
> http://www.millercoachworks.com
>
>
> --- In WanderlodgeForum@yahoogroups.com,
> "bluebirdfitz"
> wrote:
> > The Flexsteel seat on my 78 FC slowly slides out
> of position after I
> set. Not a bad position
> > for an astronaut, but a little disconcerting on
> the highway. Any
> ideas?
> >
> > John Fitz
> > 78 FC 31
> > Maynard MA.
>
>
>
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com