1980 35FC won't start via the ignition, please help

[Adria Haynes]

Well on mine, The big lug on the starter was hot, and the one onthe
solenoid was not. There was only one wire to the solenoid, and when
I tried to trace it, it went into a bundle and headed for the front.

I WILL look again, but I honestly don't think that mine has a frame
mounted relay - a foot away from the starter - in line with the
solenoid hot like I keep reading about.

Frustrating.

Thanks you very much though.

--- In WanderlodgeForum@yahoogroups.com, "Mike Hohnstein"
<MHOHNSTEIN@...> wrote:
>
> curb side frame rail adjacent to the starter. Looks like the
large relays behind the drivers side swing panel.
> MH
> ----- Original Message -----
> From: Adria Haynes
> To: WanderlodgeForum@yahoogroups.com
> Sent: Thursday, May 17, 2007 9:56 AM
> Subject: [WanderlodgeForum] Re: 1980 35FC won't start via the
ignition, please help
>
>
> Mike, what one... where? Can I jump acrossed it to test it?
>
> --- In WanderlodgeForum@yahoogroups.com, "Mike Hohnstein"
> <MHOHNSTEIN@> wrote:
> >
> > That there solinoid/relay on the frame rail is critical to
provide
> enough amperage to the cylindrical soliniod on top of the
starter.
> The automotive key switch will not cycle the starter, the relay
is
> required.
> > MH
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>