Hot Water Tank Dry Switch

[dthollis1961]

Bill,

The sensor on my '84FC is just a screw threaded into a plastic
insulator in the center of a pipe plug mounted into a "T" on the hot
water outlet of the water heater. My wire is also disconnected and
grounded. When changing my water heater, I found the pipe plug was
full of crap that may have prevented the wire from grounding.

David Hollis 84FC35 Springfield,IL


--- In WanderlodgeForum@yahoogroups.com, Wilhelmus Schreurs
wrote:
>
> I am redoing the water system in the coach. Can anyone tell me
how the "Hot water tank dry switch" works. I cannot find my sensor,
and the orange wire which should go to the sensor is grounded, which
allows the relay to disengage.
> If I went with plastic tubing, I would assume that the "T" fitting
would have to be right next tothe tank so it can be grounded as
well, either that, or ground the fitting.
> Any help would be appreciated.
> Thanks
>
> Bill 84 FC 35 SB "$quanderlodge"
> Terrace, B.C. Canada
>
>
> Ask a question on any topic and get answers from real
people. Go to Yahoo! Answers and share what you know at
http://ca.answers.yahoo.com
>
> [Non-text portions of this message have been removed]
>