Handling/Ride improvements
|
06-05-2007, 01:52
Post: #5
|
|||
|
|||
Handling/Ride improvements
So?
> > I once asked an ophthalmologist if vision was the cause of my > headaches. He sold me glasses > > GregoryO'Connor > 94ptRomolandCa > > --- In WanderlodgeForum@yahoogroups.com, "Don Bradner" > > > > > Some of you may recall that I asked if anyone here had ever had a > Ride Performance Assessment done on a Bird by Henderson's Lineup in > Grant's Pass, Oregon. Didn't hear from anyone who had, just one > recommendation for another place and Tom's very negative view of the > idea. > > > > Our first 2K miles or so were mostly freeway, and I would class the > overall handling/ride on freeways as good. I was therefore surprised > on our recent trip up the coast of Oregon and Washington at how > poorly it rode the many washout-dips on 101. Porpoise and sway was > the order of the day! > > > > I decided that it would be worth the $150 cost of the assessment to > see what a pro thought, and we took Blue Thunder into Grant's Pass > this past Wednesday. Their shop foreman did our assessment drive, and > he did not feel that the ride was exceptionally bad, but did agree > that it could be better. He recommended, in order of importance: > > > > 1. Adjust the existing front Konis (presumably a replacement by > another owner) to a stiffer ride. > > > > 2. Add their motion-control units to the air bags. > > > > 3. Replace the original shocks on the rear with Koni FSDs. > > > > The first item turned out to be impossible - the shocks simply > would not take an adjustment. They tried both on (releasing the > bottom end) and off the coach on the bench. All they would do was > spin. They were also very difficult to expand and contract. > > > > Replacing the shocks was not possible on the spot, because of the > three different part numbers needed (90-2490SP1 in the front, 9005- > 1025 on the drivers, 8805-1010 on the tag) only the 8805 is a stock > part for them, and the various sources they use, including KoniRV, > did not have the others in stock either. > > > > Item 2 is an interesting one, and a hard decision. The reason it is > hard is that you have to pay a lot for some very small parts. The > MCUs are sold (exclusively so far as I can tell) under Henderson's > Steer Safe brand, but are made by Donvel. They are about the size of > a shotgun shell, and their purpose is to allow normal fill-and-dump > flows to each airbag, but resist sudden flow that occurs when a bag > is compressed or extended by going over a curb/bump or dropping into > a hole. > > > > The most common installation is inline in typical plastic airlines, > as near the bag as possible. Fairly simple installation, and they run > I think $185 a pair. For hard-plumbed installations like the Bird, > they have units that screw into the top of the bag, then the airline > is attached to the unit. Those are newer designs and run $250 per > pair. > > > > I found a few postings on the internet that attested to them > working well, and none that said they didn't, although there were > definite gripes about the price! > > > > My tolerance for cost when it comes to ride/handling/safety may be > higher than most - I decided to go for it. They had 8 of them of the > necessary size (there are 7 units depending on pipe size and vehicle > weight), so we did everything but the tags. > > > > We will likely go through there in September and get all of the > shocks replaced. With a glass-half-full perspective, we are able to > evaluate the effect of the MCUs with no other changes to the system. > > > > Conclusion: significant reduction in sway. Flatter through corners. > The most obvious test is a speed bump taken at an angle. Before, when > the drivers would cross the bump, the coach would rock back and forth > in a major way, now it just tilts up as one side goes over, then the > other way as the other side crosses, then back to level. > > > > The run home from Grant's Pass involves US 199 to Crescent City. > That is about a good a test run for cornering as you can find. I > won't say the MCUs made the drive fun, but I was a lot less worried > about bouncing off things than in the past. That will always be a bit > of a paranoid run for me - I did bounce off a guard-rail in the past > on that highway in an SOB; I could swear I had enough room, but I > rocked outward just enough to hit. No scrape, just a linear crease > about 20 feet long. > > > |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Handling/Ride improvements - msecoolcal@... - 06-04-2007, 07:07
Handling/Ride improvements - Don Bradner - 06-04-2007, 10:13
Handling/Ride improvements - Don Bradner - 06-04-2007, 12:34
Handling/Ride improvements - Gregory OConnor - 06-04-2007, 15:40
Handling/Ride improvements - bubblerboy64 - 06-05-2007 01:52
Handling/Ride improvements - Don Bradner - 06-05-2007, 03:54
Handling/Ride improvements - David Brady - 06-05-2007, 03:59
Handling/Ride improvements - Robert Britton - 06-05-2007, 08:26
Handling/Ride improvements - Don Bradner - 06-05-2007, 09:06
Handling/Ride improvements - birdshill123 - 06-05-2007, 12:03
Handling/Ride improvements - Bruce Morris - 06-05-2007, 12:39
Handling/Ride improvements - Gregory OConnor - 06-05-2007, 15:50
|
User(s) browsing this thread: 6 Guest(s)