Help! Perkins Generator Problem in Atlanta

[Eric LaCruze]

I work in WPB, come see us if you can't get it sorted out or if you
need any additional service.

http://www.excelfleetservice.com/default.asp

http://deadsmall.com/1GH

Eric

On 6/14/07, Andy Coleman wrote:
> Fellow Wanderlodgers,
>
> My 83 FC-35 is on its first roadtrip as I write this. Left NJ on
> Tuesday and made it to Atlanta with few mechanical problems.
>
> Until last night. I was at a concert when the 3" dynamo pulley on my
> Perkins 12.5 generator ceased up. I smelled the smoke, turned it off,
> and watched the belt burn in half on the pulley.
>
> Spent hours running around Atlanta today looking for a new pulley and
> bearing. No luck. Nobody seems capable of finding the part number
> from 1983. Or a similar pulley that might work.
>
> Heading down to West Palm Beach, FL tonight. Its going to be very hot!
>
> Might anybody know the part number for the small 3" pulley on the
> Perkins that you adjust the tension with? If I had that number, I
> might have much more success.
>
> You should see how fried the old bearings were!
>
> Any help is appreciated!
>
> Andy
> 83 FC-35
> Spring Lake Heights, NJ
>
>
>
>
> Yahoo! Groups Links
>
>
>
>


--
A child of five would understand this.
Send someone to fetch a child of five.

-Groucho Marx