Headlight relays 86 PT?

[John]

Scott,

There is a diagram on my photo web site, with a four relay headlight
modification which will solve the issue of just relying on one single
relay for your headlights, it will give you a relay for each light.
You can find it through the link in my signature below.

I recommend using the four relay setup, this is a lot safer method in
my opinion. I do not recommend using just one Bosch relay for all of
the headlights, they are not designed for that. They will work OK
with one relay for the High beams and one relay for the Low beams. If
it was one of my Bosch relays that went bad for you, please let me
know and I will send you a new one to replace it.

John Finn
Finn's Inn Express
'82 35FCRB
BLUEBIRD WANDERLODGE
"ON THE ROAD IN MERIDIAN, MS."
CHECK OUT MY BLOG AT;
http://iamflagman.blogspot.com/
WELCOME TO THE "FINN'S INN Express" REMODELING ADVENTURE
TO VISIT, CLICK ON THE LINK BELOW
http://www.pbase.com/image/24977457
HOPKINS, SOUTH CAROLINA

/////////////////////////////////////////////////////////

--- In WanderlodgeForum@yahoogroups.com, "Scott Forman" <sforman@...>
wrote:
>
> Yes...but there is a method to my madness.
>
> I rarely use high-beams, so I did not relay them. In addition, I
had
> a relay fail in my old FC, which left me without lights relying on
my
> driving lights for illumination. With these two factors in mind, I
> installed the relay on my low-beam only. If it ever fails, I can
> still use my non-relayed (dim) high beams to get me home.
>
> Scott
>
> --- In WanderlodgeForum@yahoogroups.com, krminyl@ wrote:
> >
> > You only used one relay?
> >
> > Kevin Mc
> > YL CA
> > 86 38 PT
> >
> >
> >
> > ************************************** See what's free at
> http://www.aol.com.
> >
> >
> > [Non-text portions of this message have been removed]
> >
>