Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Headlight relays 86 PT?
06-17-2007, 02:29
Post: #10
Headlight relays 86 PT?
John,

Wasn't your relay, came from JC Whitney.

I now have one relay for low beams and no relays for high. On my FC,
I had one for low and one for high, and that set-up worked fine after
the failure. I just don't need high beams that much, so I'm not
worried about adding the relay for them. I can always go back and
add one if I need to.

Scott

--- In WanderlodgeForum@yahoogroups.com, "John"
wrote:
>
> Scott,
>
> There is a diagram on my photo web site, with a four relay
headlight
> modification which will solve the issue of just relying on one
single
> relay for your headlights, it will give you a relay for each light.
> You can find it through the link in my signature below.
>
> I recommend using the four relay setup, this is a lot safer method
in
> my opinion. I do not recommend using just one Bosch relay for all
of
> the headlights, they are not designed for that. They will work OK
> with one relay for the High beams and one relay for the Low beams.
If
> it was one of my Bosch relays that went bad for you, please let me
> know and I will send you a new one to replace it.
>
> John Finn
> Finn's Inn Express
> '82 35FCRB
> BLUEBIRD WANDERLODGE
> "ON THE ROAD IN MERIDIAN, MS."
> CHECK OUT MY BLOG AT;
> http://iamflagman.blogspot.com/
> WELCOME TO THE "FINN'S INN Express" REMODELING ADVENTURE
> TO VISIT, CLICK ON THE LINK BELOW
> http://www.pbase.com/image/24977457
> HOPKINS, SOUTH CAROLINA
>
> /////////////////////////////////////////////////////////
>
> --- In WanderlodgeForum@yahoogroups.com, "Scott Forman" <sforman@>
> wrote:
> >
> > Yes...but there is a method to my madness.
> >
> > I rarely use high-beams, so I did not relay them. In addition, I
> had
> > a relay fail in my old FC, which left me without lights relying
on
> my
> > driving lights for illumination. With these two factors in mind,
I
> > installed the relay on my low-beam only. If it ever fails, I can
> > still use my non-relayed (dim) high beams to get me home.
> >
> > Scott
> >
> > --- In WanderlodgeForum@yahoogroups.com, krminyl@ wrote:
> > >
> > > You only used one relay?
> > >
> > > Kevin Mc
> > > YL CA
> > > 86 38 PT
> > >
> > >
> > >
> > > ************************************** See what's free at
> > http://www.aol.com.
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
>
Quote this message in a reply
Post Reply 


Messages In This Thread
Headlight relays 86 PT? - Scott Forman - 06-16-2007, 05:23
Headlight relays 86 PT? - Curt Sprenger - 06-16-2007, 06:00
Headlight relays 86 PT? - Scott Forman - 06-16-2007, 06:22
Headlight relays 86 PT? - Curt Sprenger - 06-16-2007, 07:30
Headlight relays 86 PT? - Scott Forman - 06-16-2007, 08:55
Headlight relays 86 PT? - krminyl@... - 06-16-2007, 09:32
Headlight relays 86 PT? - krminyl@... - 06-16-2007, 09:35
Headlight relays 86 PT? - Scott Forman - 06-16-2007, 16:07
Headlight relays 86 PT? - John - 06-16-2007, 23:31
Headlight relays 86 PT? - Scott Forman - 06-17-2007 02:29
Headlight relays 86 PT? - krminyl@... - 06-17-2007, 12:11
Headlight relays 86 PT? - krminyl@... - 06-17-2007, 12:15



User(s) browsing this thread: 1 Guest(s)