Can Anyone Help??? Stuck with an extended generator... 84PT40!!!!

[mbulriss]

The safety latch on the hydraulic genset tray systems is a slide bar
locking assembly controlled manually by a bar handle sticking out the
front of the tray, which you push one way or the other to lock/unlock.
When locked, the bar ends then stick through holes in the frame
rails. There is a switch sensor that is activated when the bar is
locked in place. If not locked in place, a warning light on the dash
turns on.

Sounds like BB went to the electric ram sometime in 1986, that did not
need the slide bar lock, based on recent posts.

Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX



--- In WanderlodgeForum@yahoogroups.com, "Don Bradner"
wrote:
>
> Can someone with hydraulic+safety latch describe how the operation
is controlled?
>
> With the my electric generator slide (presumably rack and pinion
gearing, although I haven't looked to see for sure) the control is in
the left front compartment with the radiator and battery. There would
be no way to open the generator if I had to hold a latch at the same
time - would require two people.
>
> Don Bradner
> 90 PT40 "Blue Thunder"
> Eureka, CA
>
> On 6/30/2007 at 3:25 PM Scott Forman wrote:
>
> >And no safety latch?
> >
> >--- In WanderlodgeForum@yahoogroups.com, wrote:
> >>
> >> Scott,
> >> Mine is electric
> >> Howard T. 86 PT40
>