Leveling system solenoid

[Scott Forman]

Thanks for the response, but this is not what I need. I need a
solenoid, not a relay. The large metal cylindrical things often used
on older ignition circuits.

Scott

--- In WanderlodgeForum@yahoogroups.com, Pete Masterson
wrote:
>
> They're by Bosch and don't get cheap, Chinese-made replacements as
> they'll fail quickly. Better auto parts stores should carry them,
but
> you may need to ask. Often the cheap ones are in blister packs on
> racks in the automotive electrical department.
>
> I bought a bunch of Bosch relays to have on hand from an eBay
vendor
> -- about $1 each or so. Genuine Bosch in a 20/30 amp-rating. This
URL
> is similar to what I purchased:
> <http://cgi.ebay.com/ebaymotors/GENUINE-B...-Amp-SPDT-

> Auto-Relay-10-
>
PACK_W0QQcmdZViewItemQQcategoryZ33721QQihZ002QQitemZ120136828374QQrdZ1
>
> (You may need to piece this back together)
>
> Or just search eBay for "Bosch relay". You can get them with and
> without sockets.
>
> This URL is for a PDF with a bunch of wiring diagrams showing
> operation of a Bosch relay.
> <http://www.dlcparts.com/images/BoschGuide.pdf>
>
> And this web site has a great description of how a relay works:
> <http://www.classictruckshop.com/clubs/ea...cts/bosch/
> relay.htm>
>
> Pete Masterson
> '95 Blue Bird Wanderlodge WBDA 42
> El Sobrante CA
> aeonix1@...
>
>
>
> On Jul 4, 2007, at 12:46 PM, Scott Forman wrote:
>
> > I am troubleshooting my inoperative levelers, and I think I have
> > identified the culprit in one of the three-pin solenoids mounted
under
> > the step well. When I jump the current cross the solenoid, the
motor
> > runs, so I am pretty sure this is the problem. It is the one
where
> > the
> > third pin must be grounded to deliver the current. Where can I
find
> > one of these?
> >
> > I bought a generic solenoid that looks similar, but it isn't
getting
> > the job done.
> >
> > Thanks
> > Scott Forman
> > 86 PT38
> > Memphis
>
>
>
> [Non-text portions of this message have been removed]
>