Leveling system solenoid

[Curt Sprenger]

Contact Stephen Birtles for the solenoid.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, Calif.



truitt44@... wrote:

> Scott,
> Cole Hersee is the brand of solenoid on my coach. I would think it
> would be the same on yours. Google on Cole Hersee call home office and
> see if they have a distributor in Memphis. They will send you a
> catalog if you ask.
> Howard T., Sowega, 86 PT40
> >
> > From: "Scott Forman" <sforman@...
> >
> > Date: 2007/07/04 Wed PM 05:16:50 EDT
> > To: WanderlodgeForum@yahoogroups.com
>
> > Subject: [WanderlodgeForum] Re: Leveling system solenoid
> >
> > Thanks for the response, but this is not what I need. I need a
> > solenoid, not a relay. The large metal cylindrical things often used
> > on older ignition circuits.
> >
> > Scott
> >
> > --- In WanderlodgeForum@yahoogroups.com
> , Pete Masterson
> > wrote:
> > >
> > > They're by Bosch and don't get cheap, Chinese-made replacements as
> > > they'll fail quickly. Better auto parts stores should carry them,
> > but
> > > you may need to ask. Often the cheap ones are in blister packs on
> > > racks in the automotive electrical department.
> > >
> > > I bought a bunch of Bosch relays to have on hand from an eBay
> > vendor
> > > -- about $1 each or so. Genuine Bosch in a 20/30 amp-rating. This
> > URL
> > > is similar to what I purchased:
> > >
> <http://cgi.ebay.com/ebaymotors/GENUINE-B...-Amp-SPDT-
> <http://cgi.ebay.com/ebaymotors/GENUINE-B...-Amp-SPDT->
> >
> > > Auto-Relay-10-
> > >
> > PACK_W0QQcmdZViewItemQQcategoryZ33721QQihZ002QQitemZ120136828374QQrdZ1
> > >
> > > (You may need to piece this back together)
> > >
> > > Or just search eBay for "Bosch relay". You can get them with and
> > > without sockets.
> > >
> > > This URL is for a PDF with a bunch of wiring diagrams showing
> > > operation of a Bosch relay.
> > > <http://www.dlcparts.com/images/BoschGuide.pdf>
> > >
> > > And this web site has a great description of how a relay works:
> > > <http://www.classictruckshop.com/clubs/ea...cts/bosch/
> <http://www.classictruckshop.com/clubs/ea...cts/bosch/>
> > > relay.htm>
> > >
> > > Pete Masterson
> > > '95 Blue Bird Wanderlodge WBDA 42
> > > El Sobrante CA
> > > aeonix1@...
> > >
> > >
> > >
> > > On Jul 4, 2007, at 12:46 PM, Scott Forman wrote:
> > >
> > > > I am troubleshooting my inoperative levelers, and I think I have
> > > > identified the culprit in one of the three-pin solenoids mounted
> > under
> > > > the step well. When I jump the current cross the solenoid, the
> > motor
> > > > runs, so I am pretty sure this is the problem. It is the one
> > where
> > > > the
> > > > third pin must be grounded to deliver the current. Where can I
> > find
> > > > one of these?
> > > >
> > > > I bought a generic solenoid that looks similar, but it isn't
> > getting
> > > > the job done.
> > > >
> > > > Thanks
> > > > Scott Forman
> > > > 86 PT38
> > > > Memphis
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
>
>