hub cap

[Gardner Yeaw]

Well, it looks like my best bet is to pop the other one and
measure it up. It doesn't have any notches, but the lip is
definitely less that an inch just from memory. Maybe I will just put
it in the car and stop at a few truck stops and try to match it up.

Since I have spent half a lifetime polishing the rims, and I'm not
done yet, I just hate to see it without the shiny moon in the center.

Gardner
78FC33


--- In WanderlodgeForum@yahoogroups.com, "g_man1146"
wrote:
>
> Gardner,
> I had trouble locating the right ones for my AcuRide rims. After
> trying several from the truck stops I found the right baby moons
> here:
> http://www.realwheels.com/babymoons.html
>
> You will need the opening size and the number of tabs that keep
the
> wheel centered on the hub. As far as nut covers go, I like the
> chrome plated plastic ones better than stainless. The plastic ones
> will last two years longer than a stone! Small ones on the rear
and
> big ones on the front.
>
> Rich D. '99LXi43' CT
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
> wrote:
> >
> > I went through a pretty rough construction site yesterday, and
> one of
> > my front moon hub caps must have popped off, cause it ain't
there
> > anymore. Does anyone know of a supplier and part number for
> > replacements. I find lots them on the web, but I don't know
which
> ones
> > fit. I also need to replace a bunch of chrome lug nut covers as
> well.
> >
> > Gardner
> > 78FC33
> >
>