seat and shoulder belts

[James Hutchings]

So is the belt built into the seat and then the seat is fastened to the
floor with some type of cable system? Who sells them? Sounds interesting
for the future.



Jim



From: WanderlodgeForum@yahoogroups.com
[mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Stephen Birtles
Sent: Monday, July 09, 2007 8:02 PM
To: WanderlodgeForum@yahoogroups.com
Subject: [WanderlodgeForum] Re: seat and shoulder belts



There is another way but very expensive is to buy new seats with
unified seat belts
Stephen 77fc35

--- In WanderlodgeForum@yahoogroups.com
, "James Hutchings"
wrote:
>
> That might be a bit of a job. I would think the only safe way to do it
> would be to remove the wall panel and weld in a bracket to allow for a
> shoulder type belt. I think you will be able to locate the old floor
holes
> by looking from below, or pulling up the current carpet. It might
help to
> look and see how shoulder belts are installed in newer coaches. Let
us all
> know if you do the project, it would be nice to have that added
safety, yet
> I usually feel that I have to be more careful of the other guy for his
> safety, not mine.
>
>
>
>
>
> Jim
>
>
>
> From: WanderlodgeForum@yahoogroups.com

> [mailto:WanderlodgeForum@yahoogroups.com
] On Behalf Of bubblerboy64
> Sent: Monday, July 09, 2007 9:32 AM
> To: WanderlodgeForum@yahoogroups.com

> Subject: [WanderlodgeForum] seat and shoulder belts
>
>
>
> My 1973 has had all the belts removed. I'd like to install shoulder
> and lap belts. Found a location online selling belts brackets etc.
> Any one with experience on this perhaps you would give me some basic
> instructions. I am mostly concerned about the anchor point for the
> shoulder part of the install. I assume that the floor area is pretty
> straight forward. I am hoping that I can find and use the original
> anchor points on the floor. Area has been re carpeted but hopefully
> I can locate and use them. I told you guys I'd have lots of
> questions. Its going well however for me and I am really enjoying
> the process.
>
> John Heckman
> Central Pa
> 1973 FC
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]