Perkins Fuel Injector Pump

[Terry Neal]

Good news Ernie. Glad they did a good rebuild job for you. I had heard
good things about them from the shop I use for my Ford diesel stuff.
Now you & Bim should take a box wine break & plan a trip down the valley.

Terry Neal
Bozeman, MT
82PT40 6V92TA
74FC34 6V53T



Ernest Ekberg wrote:

> After removing that pump last week, we drove to Billings to pick it up.
> The company cleaned her up so good, I didn't recognize it.
> Today, we installed it. We have been told that it must be aligned
> exactly the way it came out. Well, after looking at the spline inside
> the engine and the receiving end inside the pump, there is only one way
> to install it because it has a key that the pump fits over. You can't
> install it any other way. Whew- I knew we were going to get it outta
> time. After priming and priming with both hands, Bim would spell me and
> prime with both of his hands. We cracked the injectors and finally
> after many attempts at starting we moved the actuator arm. Fired right
> up and we are back in business with NO LEAKS!!! What a feeling of
> relief! Ernie- 83PT40 in Montana, now I can take the coach somewhere
> and have a/c running
>
>



[Non-text portions of this message have been removed]