Entry Step
|
07-16-2007, 10:03
Post: #8
|
|||
|
|||
Entry Step
John,
One thing I didn't look at was the step on the BB that Tom Eastman is parting out. That might be an option if it wasn't damaged in the accident. - Chuck Wheeler - 82 FC 31 SB Fort Worth, TX _____ From: WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of bubblerboy64 Sent: Monday, July 16, 2007 2:01 PM To: WanderlodgeForum@yahoogroups.com Subject: [WanderlodgeForum] Re: Entry Step I've done a little looking around on line and there are replacement steps made buy KwiKee and I am thinking about going that route. The entire step really needs replaced and this would seem to me to be an easier way to do it. They are 12 volt operated and they come with everything needed. On the other hand what do I know??? But I will be learnin' John Heckman central Pa 1973 FC > > > John, > I had to put a different switch on my Newell because of a new step installation. > And replacing the plunge switch in the door jamb with the newere magnetic switch > at the bottom was nice improvement. Only thing..it was stuck on with double stick tape..came off..but I found it before it was too late and superglued it back on. If you want the original BB air- actuated step, the magnetic quick-ee switch may not work, I don't know. Brad Barton 00LXiDFW bbartonwx@... > > > To: WanderlodgeForum@...: jehdds@...: Sun, 15 Jul 2007 22:18:53 +0000Subject: [WanderlodgeForum] Re: Entry Step > > > > > Thanks for the info however my problems are a little more basic. I don't have much of anything under that step. No mechanism or valves.It appears that most parts are missing so my question is more basic. I have what is an obvious switch on the inside door jam and the steps them selves but I basically am going to have to start over getting the air and electral components. Looks like a job for the professionals. I just was wondering if this is all BB stuff or if other coaches have similar? Don't think I am up to all that is involved with this one. John Heckmancentral Pa 1973 FC>> John,> The diagrams and directions refer to a "safaety tape." It is pressure > sensitive and under the door frame. It is probaly shorted out. It is > is a safety measure so that your foot does not get crushed when the > step retracts, if you are on the step. In reality it does not seem > necessary since it is impossible to shut the door while you are on the > step! The strip is black and yellow striped and at one end (right?) > are two wires. You can cut them and that may fix the problem. If not > you can look elsewhere, but I suspect this will solve the problem. I > learned this trick at a RIV a few years ago. One of the BB service > techs told me about it.> > Sid Breese> 85PT40> Maysville, MO> > > > __________________________________________________________ > Local listings, incredible imagery, and driving directions - all in one place! Find it! > http://maps. <http://maps.live.com/?wip=69&FORM=MGAC01> live.com/?wip=69&FORM=MGAC01 > > [Non-text portions of this message have been removed] > [Non-text portions of this message have been removed] |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Entry Step - bubblerboy64 - 07-14-2007, 13:13
Entry Step - pattypape - 07-14-2007, 14:08
Entry Step - Sidney Breese - 07-15-2007, 06:37
Entry Step - bubblerboy64 - 07-15-2007, 10:18
Entry Step - Stephen Birtles - 07-15-2007, 11:16
Entry Step - brad barton - 07-16-2007, 03:45
Entry Step - bubblerboy64 - 07-16-2007, 07:00
Entry Step - Chuck Wheeler - 07-16-2007 10:03
Entry Step - brad barton - 07-16-2007, 10:26
Entry Step - Jon - 07-17-2007, 04:13
Entry Step - bubblerboy64 - 07-17-2007, 05:58
Entry Step - brad barton - 07-17-2007, 06:12
|
User(s) browsing this thread: 1 Guest(s)