Safe Combo

[Blair]

At 07:35 PM 5/5/2005, you wrote:
>Don't drill the head/door, it is expensive. Drill the side of the
>box, remove dinette booth to do so, box can easily be welded later.
>Two bolts hold it down, from inside the box.
>
>- Jeff Miller


Jeff,
I located where the bolts were, drilled a small hole in the side of
the wood frame and used an air chisel to cut through the bolts. Took about
ten minutes and I didn't have to do any welding.....
Took the box up to the local key man and he had it open pretty quick...

Blair in Oregon

[Non-text portions of this message have been removed]