Safe Combo

[Bill Goss]

Blair, Do you think he could crack the safe without
removing it? How are things?
Bill "Blue Goose" 91pt40 norcal
----- Original Message -----
From: Blair
To: WanderlodgeForum@yahoogroups.com
Sent: Friday, May 06, 2005 6:08 AM
Subject: Re: [WanderlodgeForum] Re: Safe Combo


At 07:35 PM 5/5/2005, you wrote:
>Don't drill the head/door, it is expensive. Drill the side of the
>box, remove dinette booth to do so, box can easily be welded later.
>Two bolts hold it down, from inside the box.
>
>- Jeff Miller


Jeff,
I located where the bolts were, drilled a small hole in the side of
the wood frame and used an air chisel to cut through the bolts. Took about
ten minutes and I didn't have to do any welding.....
Took the box up to the local key man and he had it open pretty quick...

Blair in Oregon

[Non-text portions of this message have been removed]



------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]