Watts Quick-connect

[David Brady]

Not that I know of Bob, but they do have quick-connect
ball valves.

David B
'02 LXi, Smokey
NC

bloomas wrote:
>
>
> ----- Original Message -----
> From: David Brady
> To: WanderlodgeForum@yahoogroups.com
>
> Sent: Tuesday, July 17, 2007 2:53 PM
> Subject: [WanderlodgeForum] Watts Quick-connect
> Davit Do they have built in check valves so you do not dump the system
> if they are disconnected?
> Bob Loomas 1985 PT 36
>
> Folks,
>
> I'm gearing up to plumb my aqua-hot and stumbled
> across Watts connectors at the local ACE hdwr store:
>
> http://www.watts.com/pro/_products.asp?catId=71
> <http://www.watts.com/pro/_products.asp?catId=71>
>
> These fittings can fully rotate under pressure and allow
> for easy disconnect and reuse. They are good for 100psi
> at 180 deg F. The connectors work for PEX, CPVC,
> or Copper; for example, a T connector can connect
> all 3 of these materials on any end of the T. Anyone have
> any experience using these in a Motorhome application?
>
> David Brady
> '02 LXi, Smokey
> NC
>
> [Non-text portions of this message have been removed]
>
>
> ------------------------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.476 / Virus Database: 269.10.8/904 - Release Date: 7/16/2007 5:42
PM
>



[Non-text portions of this message have been removed]