Safe Combo

[Kurt Achenbach]

Hello Al,

Just had my Safe serviced and reset.
The Combination is (usualy)

Left 4 turns to # ?
Right 3 turns to # ?
left 2 turns to # ?
Right 1 turn to STOP

Kurt
83FC35SB in NH





--- In WanderlodgeForum@yahoogroups.com, "Al here" wrote:
> I tried the message archieve but it wouldn't work for me, so I
thought I
> would try you guys.
>
>
>
> My safe combo has been changed from the original factory setting as
per 2
> different locksmiths. They would have drilled it but since I assume
it's
>
> empty and there are no replacement parts, I didn't see the point in
ruining
> a great safe. I was going to hid a new one somewhere until I found
these
>
> #'s under the couch seats covering the safe (shhhh, don't tell
anyone).
>
>
>
> 50 452
>
>
>
> Not really having used dial safes in the past I don't know the
proper order
> of spins and what direction to start turning. Anyone have any
advice?
>
>
>
> Al S.
>
> 1981 31' FC
>
>
>
> _____
>
> From: WanderlodgeForum@yahoogroups.com
> [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of sfedeli3
> Sent: Thursday, May 05, 2005 5:37 PM
> To: WanderlodgeForum@yahoogroups.com
> Subject: [WanderlodgeForum] Re: Headlight switch
>
>
>
> Hi Sid,
>
> I just replaced mine with one from Blue Bird. Was around $100 or
> so... like everything else. Brand was "ohmite". Was pretty easy to
> get to. New one works beautifully. Could not find a match at any
> auto parts stores, but did not try a "good" NAPA (the one here in
> Hershey is pretty sad) I can walk you throught the removal and
> installation if needed.
>
> Shane Fedeli
> 85PT40
> Hershey, PA
>
> --- In WanderlodgeForum@yahoogroups.com, "Sidney Breese"
> <ssbreese@a...> wrote:
> > Well, I think my switch has bit the dust. Some time ago I wrote
> that
> > the switch did not work in the parking position, but the headlight
> > came on, but the tail lights didn't. Someone suggested WD40 and
> that
> > worked for a while. Doesn't work this time. I have headlights,
> but
> > no marker or tailights. Does anyone know the brand or model of
the
> > switch. I went to a couple of parts stores and the said I needed
> to
> > bring the old one in and they would match it. Everything is
> working
> > fine and I am not thinking of night driving, so I hate to take the
> > dash apart to get at the switch. Hoping someone has a model
> number.
> > thanks.
> > Sid Breese
> > 85PT40
> > St. Joseph, MO
>
>
>
>
>
> _____
>
> Yahoo! Groups Links
>
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/WanderlodgeForum/
>
> * To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
> subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo!
> <http://docs.yahoo.com/info/terms/> Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]