Anyone ever use POR-15?

[David Brady]

Not that I'm aware of. The phosphoric acid etcher does do a
number on aluminum.

David Brady
'02 LXi, Smokey
NC

Scott Forman wrote:
>
> Is there anything to keep it away from (electrical, etc)?
>
> --- In WanderlodgeForum@yahoogroups.com
> , David Brady
> wrote:
> >
> > Definitely brush it on, just wear gloves and don't get any on your
> > hands. After it self-levels it'll look like you sprayed it. The
> final
> > finish is very similar to powder coating in appearance and
> toughness.
> > Those foam/sponge brushes are best, cheap bristle brushes leave
> > bristles in the paint.
> >
> > David Brady
> > '02 LXi, Smokey
> > NC
> >
> > Scott Forman wrote:
> > >
> > > Did u spray or brush it on? Is it very messy or about like any
> other
> > > paint?
> > >
> > > --- In WanderlodgeForum@yahoogroups.com
>
> > > , "Mike Hohnstein"
> > > <MHOHNSTEIN@> wrote:
> > > >
> > > > Yup, it's good stuff. Used it many times to fix on older truck
> > > frames, resulting in serious value adding to the end product.
> > > > MH
> > > > ----- Original Message -----
> > > > From: Leroy Eckert
> > > > To: WanderlodgeForum@yahoogroups.com
>
> > >
> > > > Sent: Saturday, July 21, 2007 8:25 PM
> > > > Subject: Re: [WanderlodgeForum] Anyone ever use POR-15?
> > > >
> > > >
> > > > I have used POR-15 for years. It is a great product. It flows
> out
> > > nicely. You can paint over rust ( POR )or paint without the rust
> if
> > > you Ospho, sandblast or etch steel. It needs something to bite.
> If it
> > > is exposed to sunlight, it needs to be topcoated. I'll guarantee
> it
> > > will never rust again if applied properly.
> > > > Leroy Eckert
> > > > 1990 WB-40"Smoke N Mirrors"
> > > > Niceville, FL
> > > > Royale Conversion
> > > > ----- Original Message -----
> > > > From: Scott Forman
> > > > To: WanderlodgeForum@yahoogroups.com
>
> > >
> > > > Sent: Saturday, July 21, 2007 8:07 PM
> > > > Subject: [WanderlodgeForum] Anyone ever use POR-15?
> > > >
> > > > Seems like a good product in design, wondering if it works.
> > > Wanting to
> > > > address surface oxidation under my bus. Anyone use it or know
> > > another
> > > > better product?
> > > >
> > > > Scott Forman
> > > > 86 PT38
> > > > With a cruddy underside
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> > >
> > > ----------------------------------------------------------
> ------
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG Free Edition.
> > > Version: 7.5.476 / Virus Database: 269.10.11/909 - Release Date:
> 7/20/2007 4:39 PM
> > >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
> ------------------------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.476 / Virus Database: 269.10.11/909 - Release Date: 7/20/2007
4:39 PM
>



[Non-text portions of this message have been removed]