Anyone ever use POR-15?

[David Brady]

Yup, Good night already!

David Brady
'02 LXi, Smokey
NC

David Brady wrote:
>
> Not that I'm aware of. The phosphoric acid etcher does do a
> number on aluminum.
>
> David Brady
> '02 LXi, Smokey
> NC
>
> Scott Forman wrote:
> >
> > Is there anything to keep it away from (electrical, etc)?
> >
> > --- In WanderlodgeForum@yahoogroups.com
>
> > , David Brady
> > wrote:
> > >
> > > Definitely brush it on, just wear gloves and don't get any on your
> > > hands. After it self-levels it'll look like you sprayed it. The
> > final
> > > finish is very similar to powder coating in appearance and
> > toughness.
> > > Those foam/sponge brushes are best, cheap bristle brushes leave
> > > bristles in the paint.
> > >
> > > David Brady
> > > '02 LXi, Smokey
> > > NC
> > >
> > > Scott Forman wrote:
> > > >
> > > > Did u spray or brush it on? Is it very messy or about like any
> > other
> > > > paint?
> > > >
> > > > --- In WanderlodgeForum@yahoogroups.com
>
> >
> > > > , "Mike Hohnstein"
> > > > <MHOHNSTEIN@> wrote:
> > > > >
> > > > > Yup, it's good stuff. Used it many times to fix on older truck
> > > > frames, resulting in serious value adding to the end product.
> > > > > MH
> > > > > ----- Original Message -----
> > > > > From: Leroy Eckert
> > > > > To: WanderlodgeForum@yahoogroups.com
>
> >
> > > >
> > > > > Sent: Saturday, July 21, 2007 8:25 PM
> > > > > Subject: Re: [WanderlodgeForum] Anyone ever use POR-15?
> > > > >
> > > > >
> > > > > I have used POR-15 for years. It is a great product. It flows
> > out
> > > > nicely. You can paint over rust ( POR )or paint without the rust
> > if
> > > > you Ospho, sandblast or etch steel. It needs something to bite.
> > If it
> > > > is exposed to sunlight, it needs to be topcoated. I'll guarantee
> > it
> > > > will never rust again if applied properly.
> > > > > Leroy Eckert
> > > > > 1990 WB-40"Smoke N Mirrors"
> > > > > Niceville, FL
> > > > > Royale Conversion
> > > > > ----- Original Message -----
> > > > > From: Scott Forman
> > > > > To: WanderlodgeForum@yahoogroups.com
>
> >
> > > >
> > > > > Sent: Saturday, July 21, 2007 8:07 PM
> > > > > Subject: [WanderlodgeForum] Anyone ever use POR-15?
> > > > >
> > > > > Seems like a good product in design, wondering if it works.
> > > > Wanting to
> > > > > address surface oxidation under my bus. Anyone use it or know
> > > > another
> > > > > better product?
> > > > >
> > > > > Scott Forman
> > > > > 86 PT38
> > > > > With a cruddy underside
> > > > >
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > >
> > > >
> > > > ----------------------------------------------------------
> > ------
> > > >
> > > > No virus found in this incoming message.
> > > > Checked by AVG Free Edition.
> > > > Version: 7.5.476 / Virus Database: 269.10.11/909 - Release Date:
> > 7/20/2007 4:39 PM
> > > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> > ----------------------------------------------------------
> >
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.476 / Virus Database: 269.10.11/909 - Release Date:
> 7/20/2007 4:39 PM
> >
>
> [Non-text portions of this message have been removed]
>
>
> ------------------------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.476 / Virus Database: 269.10.11/909 - Release Date: 7/20/2007
4:39 PM
>



[Non-text portions of this message have been removed]