Anyone ever use POR-15?

[Mike Hohnstein]

Done it both wayz, spray requires masking, somewhat. Brush works OK too. Keep
in mind my experience has been on vintage dump trucks.
However, it makes them look impressive and I usually get top buck when selling
time comes.
MH
----- Original Message -----
From: Scott Forman
To: WanderlodgeForum@yahoogroups.com
Sent: Saturday, July 21, 2007 8:54 PM
Subject: [WanderlodgeForum] Re: Anyone ever use POR-15?


Did u spray or brush it on? Is it very messy or about like any other
paint?

--- In WanderlodgeForum@yahoogroups.com, "Mike Hohnstein"
<MHOHNSTEIN@...> wrote:
>
> Yup, it's good stuff. Used it many times to fix on older truck
frames, resulting in serious value adding to the end product.
> MH
> ----- Original Message -----
> From: Leroy Eckert
> To: WanderlodgeForum@yahoogroups.com
> Sent: Saturday, July 21, 2007 8:25 PM
> Subject: Re: [WanderlodgeForum] Anyone ever use POR-15?
>
>
> I have used POR-15 for years. It is a great product. It flows out
nicely. You can paint over rust ( POR )or paint without the rust if
you Ospho, sandblast or etch steel. It needs something to bite. If it
is exposed to sunlight, it needs to be topcoated. I'll guarantee it
will never rust again if applied properly.
> Leroy Eckert
> 1990 WB-40"Smoke N Mirrors"
> Niceville, FL
> Royale Conversion
> ----- Original Message -----
> From: Scott Forman
> To: WanderlodgeForum@yahoogroups.com
> Sent: Saturday, July 21, 2007 8:07 PM
> Subject: [WanderlodgeForum] Anyone ever use POR-15?
>
> Seems like a good product in design, wondering if it works.
Wanting to
> address surface oxidation under my bus. Anyone use it or know
another
> better product?
>
> Scott Forman
> 86 PT38
> With a cruddy underside
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]