Anyone ever use POR-15?

[Jonathan L]

I have used it before on restoring my cars. The only prep I do is to take a
wire brush and knock off any dirt and loose scale. I usually put a wire
brush attachment to my drill to knock the stuff off. It does the trick. I
have also washed the area down if it was really dusty/dirty. I did let it
dry thoroughly before applying.

Jonathan Leifheit
Wannabee

At 09:02 AM 7/22/2007, you wrote:
>Is prep required to go over a rusty surface?
>
>
>--- In WanderlodgeForum@yahoogroups.com, "Leroy Eckert"
> wrote:
> >
> > I have used POR-15 for years. It is a great product. It flows out
>nicely. You can paint over rust ( POR )or paint without the rust if
>you Ospho, sandblast or etch steel. It needs something to bite. If it
>is exposed to sunlight, it needs to be topcoated. I'll guarantee it
>will never rust again if applied properly.
> > Leroy Eckert
> > 1990 WB-40"Smoke N Mirrors"
> > Niceville, FL
> > Royale Conversion
> > ----- Original Message -----
> > From: Scott Forman
> > To: WanderlodgeForum@yahoogroups.com
> > Sent: Saturday, July 21, 2007 8:07 PM
> > Subject: [WanderlodgeForum] Anyone ever use POR-15?
> >
> >
> > Seems like a good product in design, wondering if it works.
>Wanting to
> > address surface oxidation under my bus. Anyone use it or know
>another
> > better product?
> >
> > Scott Forman
> > 86 PT38
> > With a cruddy underside
> >