Hydraulic Leveler Crisis...

[Andy Coleman]

Hey Everyone,

Spoke with the nice folks at HWH this afternoon. I'm acually going to
stop by the factory in Moscow, Iowa on my way out west. When I looked
at the map, I realized it was not far out of my way - just off Route 80!

My apointment is 7 AM on Tuesday the 31st. They are actually going to
re-build my jack as I wait and install it for me. The woman estimated
4 - 5 hours total. Plus, this process is much cheaper - it will only
cost me approx. $230 to rebuild the unit, as compared to $350 to ship
me a re-built one.

When I told them I have an 83' FC-35, they were unable to tell what
model jack I have. However, I went through my box of Wanderlodge info
and found some specs on a AP-2381 jack. I mentioned the AP-2381 to
the person on the phone who described it back to me. The description
fits - it is the model in my bird.

They even have electrical hook-ups for RVers spending the night for
service in the morning! Sounds like a pretty cool place. While I'm
there, I'm going to have them check my other jacks as well.

Just wanted to fill you all in on the details!

Thanks again for the responses!

Andy Coleman
83' FC-35
Spring Lake Heights, NJ


--- In WanderlodgeForum@yahoogroups.com, FRED WELLS wrote:
>
> I have the manual that I believe came from hwh. In it it has parts
breakdown drawings for 2 style of units. One is AP-2512, Lifting
capacity is 9000 lbs., The other heavier unit is AP-2318, lifting
capacity is 16,500 lbs. Hope this helps. 1980 FC.
>
> Andy Coleman wrote: Hey Scott,
>
> Thanks for the quick response..
>
> I'm going to contact HWH momentarily. However, I don't know what
> model jack I need to order. Can't find any part numbers on it.
>
> Any suggestions on how to find that out?
>
> Andy
>
> --- In WanderlodgeForum@yahoogroups.com, "Scott Forman" <sforman@>
> wrote:
> >
> > 1) Go to HWHcorp.com
> > 2) Purchase rebuilt jack
> > 3) Request overnight shipping
> > 4) Receive & install
> > 5) Ship your old one back to HWH for core credit
> >
> > Replaced one on my 82 FC with a rebuild, will probably end up cheaper
> > than trying to have it fixed.
> >
> > Scott Forman
> > 86 PT38
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Andy Coleman"
> > wrote:
> > >
> > > Fellow Wanderlodgers:
> > >
> > > One of the rear hydraulic leveler jacks on my 83' FC-35 has been
> > > leaking fluid for some time. Decided to fix it before leaving on my
> > > first big road trip.
> > >
> > > So I pulled it off, and two weeks ago delivered it to a hydraulic
> > > repair shop. They told me they would have it fixed in a few days.
> > >
> > > Well, they called me back last Friday to tell me that their main
> > > mechanic quit, and the remaining guys didn't know how to fix it.
> > >
> > > I leave for my first road trip on Saturday. There is a leaking
> > > hydraulic jack in the back of my car. Not sure if any shop has the
> > > time to fix it at this point....
> > >
> > > Anybody know where I might be able to buy a rebuilt one and drop off
> > > mine as a core? Is the factory that made these things still in
> > > business?
> > >
> > > I'm not even sure what model I have. Can't find any part numbers.
> > > One of my Wanderlodge books mentions the AP-2968 and AP-2381. Does
> > > anybody know what model was installed in early 80's FCs?
> > >
> > > Any help would be greatley appreciated! I'm beginning to regret
> > > tackling this project with just weeks to go.
> > >
> > > Thanks everyone!
> > >
> > > Andy Coleman
> > > 83' FC-35
> > > Spring Lake Hts., NJ
> > >
> >
>
>
>
>
>
>
> ---------------------------------
> Get the Yahoo! toolbar and be alerted to new email wherever you're
surfing.
>
> [Non-text portions of this message have been removed]
>