Stair Cover

[George Burke]

My thanks to Fred and Chet for their help. The # 14, 1 and 1/2 in. SS
screws worked perfectly. The staircase cover looks great, and works
like it was designed to. I do not understand why a previous owner took
it off. Now theres one less thing in the Job Jar. Thanks Guys, George
Burke 1977FC31 Charlotte--- In WanderlodgeForum@yahoogroups.com, "George
Burke" wrote:
>
> A previous owner removed the hinged stair cover that usually mounts to
> the half closet on my 1977 FC31. It has carpet on one side, and the
> same woodgrain formica on the other that is through out my bus. This
> nifty item folds down over the stairs, making that area level with the
> rest of the bus. I would like to reinstall this for the benefit of my
> older sister, who has hip problems. There are four screw holes thru
> which large screws were used to mount it thru the carpet, and to the
> floor. Does any FC owner have one of these, and if so would you pls.
> measure the length of the (4) scews, and let me know. I want to make
> sure that I install screws long enough to hold the cover intact, but
> don't want to send then so deep as to reach China, or some electrical
> wire that BB hid under there some yrs. ago. TIA George Burke 1977FC31
> Charlotte
>