Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
turn signals (fuse?)
08-11-2007, 10:03
Post: #5
turn signals (fuse?)
Rose Mary if it wouldn't be too inconvient or possible too nosy, could you
elaborate on exactly what you had done. The reason I ask is that for several
years now we (forum members) have been recommending Roberts as a good spot
for service. If you could enlighten us to exactly what was done in your
service and what parts were replaced it might change a few minds. I sure
hope not thought because I've had some good work done there.

On 11/08/07, Rose Mary wrote:
>
>
> yes, Roberts Motors have been there before but wasn't too impressed
> this time around.
> Rose Mary
>
> --- In WanderlodgeForum@yahoogroups.com,
> "Rob Robinson"
> wrote:
> >
> > Rose Mary was the shop Robert's Motors of Medford?
> >
> > On 11/08/07, Rose Mary wrote:
> > >
> > > Hi group
> > > haven't been on in a long while.
> > > Had the bird to a shop in Medford yesterday, replaced a solednoid for
> > > the levelers, checked the steering box bolts (one was nearly off) and
> > > to see why the air horns quit.
> > >
> > > Anyway to make a long story short I now have NO turn signals.....
> > > readying for a trip (working for SE Publications doing RV site maps).
> > >
> > > Sure hate to have to go back to Medford monday.....felt a little
> > > skinned by the labor charges and time spent... after hours of making
> > > sure there was air etc. (they told me I needed new horns- I asked them
> > > if the horns were getting juice, they finally humored me and got up on
> > > top to check, they were. Turned out the connections inside the back of
> > > the horn just needed cleaning), also wanted the retarder greased and
> > > the guy spend 20 minutes and couldn't find it. I showed him where it
> > > was (zerk fitting).
> > > I was also charged 1.1 hours of labor to clean battery terminals &
> > > check fluid......the guys clock in and out of each job. One of them
> > > went for a test drive with another mechanic and was gone a long time.
> > > Beings it was after hours by the time I left the service manager was
> > > already gone so I couldn't talk to him about the labor hours....
> > >
> > > Had all turn signals when I went and it was after hours by the time I
> > > hit the road...later realized I had no turn signals....
> > >
> > > Wondering if there is a fuse or plug somewhere I can check.
> > > Blast!
> > >
> > > Thanks
> > > Rose Mary
> > > 82 FC Side Bath
> > > JP's White Bird
> > > Oregon
> > >
> > >
> > >
> >
> >
> >
> > --
> > Rob, Sue & Merlin Robinson
> > 94 WLWB
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>



--
Rob, Sue & Merlin Robinson
94 WLWB


[Non-text portions of this message have been removed]
Quote this message in a reply
Post Reply 


Messages In This Thread
turn signals (fuse?) - Rose Mary - 08-11-2007, 07:58
turn signals (fuse?) - Jay Darst - 08-11-2007, 08:30
turn signals (fuse?) - Rob Robinson - 08-11-2007, 08:39
turn signals (fuse?) - Rose Mary - 08-11-2007, 09:08
turn signals (fuse?) - Rob Robinson - 08-11-2007 10:03
turn signals (fuse?) - Tommy Standard - 08-12-2007, 02:45
turn signals (fuse?) - Rose Mary - 08-12-2007, 11:48
turn signals (fuse?) - Curt Sprenger - 08-12-2007, 12:10
turn signals (fuse?) - Rose Mary - 08-12-2007, 12:20
turn signals (fuse?) - freewill2008 - 08-12-2007, 12:27
turn signals (fuse?) - Rose Mary - 08-12-2007, 12:36
turn signals (fuse?) - Curt Sprenger - 08-12-2007, 13:08
turn signals (fuse?) - freewill2008 - 08-12-2007, 13:27
turn signals (fuse?) - Pete Masterson - 08-12-2007, 13:47



User(s) browsing this thread: 1 Guest(s)