Thermostate Setting for Failing Squarrel Fan

[sfedeli3]

Hi All,

I will get some photos of the installation tonight after work and
post them/email them to any one interested. If you were able to repair
the squirrel cage AND have a Hayden fan, the bedroom would stay REALLY
cool. Howard- do you recall the part # on the Grainger fan that you
installed on the squirrel cage? Was it a Dayton Model #2M197 ??

-Shane

--- In WanderlodgeForum@yahoogroups.com, "Jay Darst"
wrote:
>
> Curt,
>
> I found a Snap-Disc type thermostat buried in the ceiling of the
> engine compartment. It is positioned so that it would read the temp
> DIRECTLY below the bed, in the engine compartment.
>
> There is a piece of sheet metal that is spaced from the engine
> compartment ceiling. The SNAP-DISC thermostat is between the 2 pieces
> of sheet metal.
>
> Shane Fideli used the wires that powered the noisey old long skinny
> fan to trigger a relay that powered an automotive type fan fastened to
> the inside of the curb side engine compartment louvers at the top.
>
> He did a nice job on the installation. I wish I would have looked a
> little closer at it. I plan to install a cooling fan the same way.
>
> Shane, if you would send me some close-up pictures of the mounting
> procedure for that fan, I would appreciate it much.
>
> Jay Darst
> 85PT40
> Sprinfgield/Sullivan, IL
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Curt Sprenger"
> wrote:
> >
> > Several of us have recently posted about the ratteling or non working
> > fan that is mounted in the upper rear area of the engine compartment.
> > Does anyone know the thermostat degree setting for that fan? Anyone
> > know where that thermostate is located?
> >
> > My thought at this time is to control the add-in Hayden fans to run
> > off the same controls.
> > --
> > Curt Sprenger
> > 1987 PT38 8V92 "MacAttack Racing"
> > Anaheim Hills, CA
> >
>