Help with generator problem, AC voltage

[George Lowry]

Seems to be a common problem - especially with those Todd transfer
switches. Maybe that is why they are no longer in business. I have
seen two fixes if that is where the problem is located. One is to
replace with a transfer switch from Iota; Second is to replace the
relay with one from Graingers.

George Lowry
'95 WBDA 4203 & GM 4106 (for sale)
Spearfish, SD

Jeff Miller wrote:

> You have an open neutral somewhere between the genset and load center.
> Try cycling the transfer switch first.
>
> - Jeff Miller
> http://www.wanderlodge.net
> http://www.millercoachworks.com
>
>
> --- In WanderlodgeForum@yahoogroups.com, "awojteczko" wrote:
>
>>Hello,
>>
>>I wonder if I can get some help with my generator problem?
>>The generator runs well but my AC voltages are 112 and 147 volts ac
>
> on
>
>>legs one and two. When I plug in a vacuum cleaner it will barely turn
>>the motor. If I turn the hot water heater on the relay under the sink
>>chatters like crazy. Could this be a brush problem in the generator?
>>If anyone has had a similar problem and could point me in the right
>>direction it would be very much appreciated.
>>
>>Thanks,
>>Andy
>>88WB40
>>Caledon East, Ontario, Canada
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>