Help with generator problem, AC voltage

[awojteczko]

--- In WanderlodgeForum@yahoogroups.com, George Lowry
wrote:

Hi Jeff,

Can you tell me where this transfer switch is located and what does
it look like?

Thanks,
Andy


> Seems to be a common problem - especially with those Todd transfer
> switches. Maybe that is why they are no longer in business. I
have
> seen two fixes if that is where the problem is located. One is to
> replace with a transfer switch from Iota; Second is to replace the
> relay with one from Graingers.
>
> George Lowry
> '95 WBDA 4203 & GM 4106 (for sale)
> Spearfish, SD
>
> Jeff Miller wrote:
>
> > You have an open neutral somewhere between the genset and load
center.
> > Try cycling the transfer switch first.
> >
> > - Jeff Miller
> > http://www.wanderlodge.net
> > http://www.millercoachworks.com
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com, "awojteczko"
wrote:
> >
> >>Hello,
> >>
> >>I wonder if I can get some help with my generator problem?
> >>The generator runs well but my AC voltages are 112 and 147 volts
ac
> >
> > on
> >
> >>legs one and two. When I plug in a vacuum cleaner it will barely
turn
> >>the motor. If I turn the hot water heater on the relay under the
sink
> >>chatters like crazy. Could this be a brush problem in the
generator?
> >>If anyone has had a similar problem and could point me in the
right
> >>direction it would be very much appreciated.
> >>
> >>Thanks,
> >>Andy
> >>88WB40
> >>Caledon East, Ontario, Canada
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >