Help with generator problem, AC voltage

[Jeff Miller]

In the '88 it should be the rotary switch at the top of the stairs
that you switch between Shore 50, Gen, Off, Shore 30.

- Jeff Miller
http://www.wanderlodge.net
http://www.millercoachworks.com


--- In WanderlodgeForum@yahoogroups.com, "awojteczko"
wrote:
> --- In WanderlodgeForum@yahoogroups.com, George Lowry
> wrote:
>
> Hi Jeff,
>
> Can you tell me where this transfer switch is located and what does
> it look like?
>
> Thanks,
> Andy
>
>
> > Seems to be a common problem - especially with those Todd
transfer
> > switches. Maybe that is why they are no longer in business. I
> have
> > seen two fixes if that is where the problem is located. One is
to
> > replace with a transfer switch from Iota; Second is to replace
the
> > relay with one from Graingers.
> >
> > George Lowry
> > '95 WBDA 4203 & GM 4106 (for sale)
> > Spearfish, SD
> >
> > Jeff Miller wrote:
> >
> > > You have an open neutral somewhere between the genset and load
> center.
> > > Try cycling the transfer switch first.
> > >
> > > - Jeff Miller
> > > http://www.wanderlodge.net
> > > http://www.millercoachworks.com
> > >
> > >
> > > --- In WanderlodgeForum@yahoogroups.com, "awojteczko"
> wrote:
> > >
> > >>Hello,
> > >>
> > >>I wonder if I can get some help with my generator problem?
> > >>The generator runs well but my AC voltages are 112 and 147
volts
> ac
> > >
> > > on
> > >
> > >>legs one and two. When I plug in a vacuum cleaner it will
barely
> turn
> > >>the motor. If I turn the hot water heater on the relay under
the
> sink
> > >>chatters like crazy. Could this be a brush problem in the
> generator?
> > >>If anyone has had a similar problem and could point me in the
> right
> > >>direction it would be very much appreciated.
> > >>
> > >>Thanks,
> > >>Andy
> > >>88WB40
> > >>Caledon East, Ontario, Canada
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >