Bulk Oil Fill

[Howard O. Truitt]

Ryan,
I have the the air solenoid and also a air pressure switch but no 6 pin
connector in site.
Howard Truitt, Camilla, Ga., 86 PT40

----- Original Message -----
From: Ryan Wright
To: WanderlodgeForum@yahoogroups.com
Sent: Thursday, August 23, 2007 2:55 PM
Subject: Re: [WanderlodgeForum] Bulk Oil Fill


Howard,

On 8/22/07, Howard O. Truitt wrote:
>
> On my 86 PT40 there is a bulk oil fill tank. I have a drawing showing a 6
pin connector.
> Anyone know where this connector is located.

Open the side panel of the coach so you can look directly at the bulk
oil fill tank from the passenger side. The connector should be roughly
in the middle of the thing, maybe a bit to the right, and slightly
behind it. Mine is on a bracket welded to the tank if memory recalls.
I believe this is a connection to a solenoid (you should see it right
in there, too) that opens a valve to push air into the bulk oil tank
when energized by the oil fill switch, thus forcing oil out the
nozzle.

Hope this helps.

-Ryan
'86 PT-40 8V92
Tri-Cities, WA





------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.476 / Virus Database: 269.12.2/966 - Release Date: 8/22/2007 9:05
AM


[Non-text portions of this message have been removed]