Got her Off

[bubblerboy64]

Stephen, Thanks for the info. The diameter appears to be 7/8 inch
as close as I can measure with a ruler and there are 36 teeth on the
spline gear. That sound like a BB1?
John Heckman
Central Pa
1973 FC
>
> http://www.vipwheels.com
> you have to measure the diameter and number of splines on the shaft
> before you call
> IF it is the same as the later model coaches the center is a BB1
> you just pick out the steering wheel you want and they will add the
> center
>
> Stephen 77fc35
> owner of Dupree Valves and Wanderlodge Vintage Parts
>
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "bubblerboy64"
> wrote:
> >
> > I managed to get the steering wheel off. Jims suggestions plus
maybe
> > some help from the penitrating oil. Now, can you tell me what I
need
> > to know to order a replacement? This wheel is about 21 inches in
> > diameter and I'd like to drop back an inch or two other then that
I
> > have no real strong preference but I'll need to know the
specifics
> > which respect internal dementions etc. Again the help is greatly
> > appreciated.
> > John Heckman
> > central Pa
> > 1973 FC
> >
>