Overhead load center questions

[Gardner Yeaw]

Art,
From the sound of it, someone has wired something that is feeding
back power from the solenoid output to the solenoid coil. Once
energized it will not release. I hate to say it, but 'happy hunting".
You will need to determine what new device or new connection is
connected to the line from the ignition switch to the relay coil.

Gardner
78FC33

--- In WanderlodgeForum@yahoogroups.com, "Gregory OConnor"
wrote:
>
> many solenoid need major amps/volts to open but less to stay open.
> maybe your ign switch is going bad and the only time it pass no
power
> is when the input power to the ign switch is shut down with the
> master power. all other times it is bleeding enough to maintain
the
> solenoid open but not enough to open a closed solenoid????????????
>
> OR,,, bad solenoid. I would check the solenoid signal post (where
> wire from ign switch attach to sol.) with a good multimeter
with
> the ign switch off. then, remove the ign wire at the solenoid and
see
> if there is power ;at the solenoid signal post or the ;end of the
> removed wire from the ign switch. if power at the signal post it
may
> be the solenoid is internally screwed??????????
>
> 'Self latching solenoid'?? is there such a thing???
> Greg
> 94ptRomolandCa
>
> --- In WanderlodgeForum@yahoogroups.com, "amweath"
> wrote:
> >
> > I'm trying to get my rear camera working. It worked when I
picked up
> > my coach in April. In the overhead load center (above the driver)
> > is a row of circuit breakers whose power is provided by an
adjacent
> > solenoid. This solenoid is energised by turning on the ignition
key.
> > These breaker are for the dash A/C controls, rear camera
trigger,
> and
> > various indicator lights. The solenoid is energised by the key.
> > However, turning the key off does not release it. It doesn't
realeas
> > untill the master power switch is turned off. Are these supposed
to
> > be self latching solenoids? I wouldn't think so. Otherwise, too
many
> > things stay enabled even though the key is off.
> >
> > By the way, I did find the camera problem. A broken wire in the
> rear
> > overhead. Have yet to solder it - on my way to do it now.
> >
> > Art Weatherly
> > Riverside Ca
> > '85 PT36
> >
>