Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Question for the group...
09-08-2007, 08:35
Post: #5
Question for the group...
no propblem there are other newell owners that are on these 2 forums
Just as an aside we supply the holding tank dump valves used by Newell
Stephen 77fc35
Owner Dupree Valves





--- In WanderlodgeForum@yahoogroups.com, Travis Martin wrote:
>
> I'd like to participate in this group; I've been lurking for a while.
> But I don't have a BB; I have a Newell. There is a Newell forum, but
> it seems to be all but dead. I suspect that's more because of the
> format than anything else; posting, replying, etc, are very clumsy
> and don't lend themselves to carrying on a "conversation" so it just
> never happens. This email reflector format is much more like what we
> humans think of as carrying on a real-time conversation, and so it
> stays very lively.
>
> In any event, my question is: keeping in mind that my Newell and a PT
> are quite similar, and, more importantly, share almost all the same
> systems (DD V92, Allison, wheels, refrig, a/c, plumbing, etc etc)
> that generate about 97% of the questions and answers here, I'd think
> that my questions when I have them would be relevant to the group and
> I can occasionally contribute suggestions that will also be relevant
> almost all the time. (I have better sense than to volunteer anything
> on the BBQ thread...you don't want to try my cooking...)
>
> But I also don't want to feel like an "outsider" being tolerated out
> of politeness. So my question is, how would you guys feel about
> admitting a foriegner?
>
> Travis in Lubbock, Texas with a 38' Newell; think of it as a PT38
> with aluminum skin...
>
Quote this message in a reply
Post Reply 


Messages In This Thread
Question for the group... - erniecarpet@... - 09-08-2007, 02:01
Question for the group... - Travis Martin - 09-08-2007, 02:38
Question for the group... - mbulriss - 09-08-2007, 05:41
Question for the group... - Fred Hulse - 09-08-2007, 06:32
Question for the group... - Stephen Birtles - 09-08-2007 08:35
Question for the group... - Ryan Wright - 09-08-2007, 12:23
Question for the group... - brad barton - 09-08-2007, 13:31
Question for the group... - erniecarpet@... - 09-08-2007, 21:48
Question for the group... - scoggins_jim - 09-08-2007, 21:50
Question for the group... - encantotom - 09-09-2007, 14:56



User(s) browsing this thread: 1 Guest(s)