RCA back-up camera

[Keith Strehle]

Thanks for the info Art. Can you tell me if the multi-pin connector
on yours was being used? Or were there only the 12V leads and the
small cam-lock cable?

Keith
84FC35

--- In WanderlodgeForum@yahoogroups.com, "amweath"
wrote:
>
> Keith,
>
> I'm also trying to get mine working. I took the camera to an
> electronics store that dealt in security systems. They were able to
> test
> my camera - it works fine. I've traced my trouble to a broken lead
> going from the camera trigger relay to the TV on/off panel above
> the drivers head. The problem is that it isn't obvious where the
> lead broke off. This after two days off tracing leads.
>
> Good luck
>
> Art Weatherly
> Riverside Ca
> '85 PT36
>
>
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Keith Strehle"
> wrote:
> >
> > Hey everyone, I have an RCA back up camera in my 84FC35.
(original
> > equip?) I removed it yesterday and hope to test it somehow. Any
> > suggestions? I know there is power to the camera and the monitor
> > works.
> >
> > Also, there are three connections on the back of the camera. One
> for
> > the 12V, one is a single pin cam lock type and the third is a
> round
> > multi pin connection. There is not a cable for the multi pin
> > connector. Should there be a cable for the multi pin connector
or
> is
> > it not required?
> >
> > Thanks, Keith
> > 84FC35
> >
>