Transmission "Do Not Shift" Light and Code 22 (Speed Sensor)

[David Hanvy]

Leroy/Kevin,
Thanks for your replies. I started the engine from the rear remote
and the transmission warning light/do not shift remains on. No change
when I switched back to the front either. Additionally, I
disconnected from shore power and disconnected the ground cable on
the battery bank in an effort to reset the tranny. No luck on that
either. (do not shift equals WILL not shift) I plan to to locate and
read up on the Speed Sensor as a next step.
All input is appreciated. David Hanvy 89WB PT40 Crosby, TX

--- In WanderlodgeForum@yahoogroups.com, "Leroy Eckert"
wrote:
>
> Although I don't think your bus would start if the remote rear
start switch was acting up, mine will give me a do not shift light in
the rear start position and in the front position if it is not
engaged properly. Not all coaches are wired to give a do not shift
light on the remote rear start position but mine does. I have never
checked my codes so can't help there. I would cycle that switch to
rear, off, and back to front, restart and see what happens.. It is a
long shot but easy to do.
> Let us know what you find for future reference.
> Leroy Eckert
> 1990 WB-40"Smoke N Mirrors"
> Niceville, FL
> Royale Conversion
> ----- Original Message -----
> From: David Hanvy
> To: WanderlodgeForum@yahoogroups.com
> Sent: Thursday, September 13, 2007 8:48 PM
> Subject: [WanderlodgeForum] Transmission "Do Not Shift" Light and
Code 22 (Speed Sensor)
>
>
> Greetings All; I started my coach today which has been sitting in
> covered storage with shore power for about two weeks. The
> transmission "Do Not Shift" light and check transmission light
are
> staying on. It flashes a Code 22 which indicates a Speed Sensor
issue.
> Does anyone have any experience with this issue? I did not note
any
> transmission problems on my last trip which was about two weeks
ago. I
> cleaned the ground strap connections on the transmission and
frame and
> checked the transmission cannon plug but the warning lights
remain on.
> Thanks. David Hanvy 89WB PT40 Crosby, TX
>
>
>
>
>
> [Non-text portions of this message have been removed]
>