Help with generator problem, AC voltage

[Hovda, Craig]

I had low voltage on my 90WL40 and I adjusted the idle and it brought up
the voltage to the proper level.



Craig

40WL

Bigfork Mt.



________________________________

From: WanderlodgeForum@yahoogroups.com
[mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Jeff Miller
Sent: Friday, May 06, 2005 8:26 PM
To: WanderlodgeForum@yahoogroups.com
Subject: [WanderlodgeForum] Re: Help with generator problem, AC voltage



You have an open neutral somewhere between the genset and load center.
Try cycling the transfer switch first.

- Jeff Miller
http://www.wanderlodge.net
http://www.millercoachworks.com


--- In WanderlodgeForum@yahoogroups.com, "awojteczko" wrote:
> Hello,
>
> I wonder if I can get some help with my generator problem?
> The generator runs well but my AC voltages are 112 and 147 volts ac
on
> legs one and two. When I plug in a vacuum cleaner it will barely turn
> the motor. If I turn the hot water heater on the relay under the sink
> chatters like crazy. Could this be a brush problem in the generator?
> If anyone has had a similar problem and could point me in the right
> direction it would be very much appreciated.
>
> Thanks,
> Andy
> 88WB40
> Caledon East, Ontario, Canada





________________________________

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

* To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com
>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .



[Non-text portions of this message have been removed]