water heater replacment

[Rob Robinson]

When I had to replace my Seaward I chose a Force Ten because they copied the
basic Seaward design and improved upon it (larger diameter piping, stainless
cover). I found the pricing good also. Google Force Ten for sales and here's
their site address http://www.force10.com/heater.html

On 14/10/2007, Robert & Teri Rahn wrote:
>
> I was able to get back to the water heater and check for leaks. It is
> not leaking out of the pressure relief valve and there is no leaking at
> any of the pipes. It is a little wet way back at the corner back there
> which must be directly above the hole where the water is dripping out.
> I turned the water heater off a few days ago and water is still
> dripping slowly out of the hole in the engine compartment. So the water
> heater must be rusted out and the leak is coming from below it. Where
> is the best place to buy one of these heaters and what is the best way
> to remove it? It looks like it is going to be quite a chore to get it
> out of there.
>
> Robert Rahn
> Kalispell, Mt.
> 1988 PT 40
>
>
>



--
Rob, Sue & Merlin Robinson
94 WLWB


[Non-text portions of this message have been removed]