water heater replacment

[Stephen Birtles]

Or dupreeproducts.com
Stephen 77fc35

--- In WanderlodgeForum@yahoogroups.com, "Rob Robinson"
wrote:
>
> When I had to replace my Seaward I chose a Force Ten because they
copied the
> basic Seaward design and improved upon it (larger diameter piping,
stainless
> cover). I found the pricing good also. Google Force Ten for sales
and here's
> their site address http://www.force10.com/heater.html
>
> On 14/10/2007, Robert & Teri Rahn wrote:
> >
> > I was able to get back to the water heater and check for leaks.
It is
> > not leaking out of the pressure relief valve and there is no
leaking at
> > any of the pipes. It is a little wet way back at the corner back there
> > which must be directly above the hole where the water is dripping out.
> > I turned the water heater off a few days ago and water is still
> > dripping slowly out of the hole in the engine compartment. So the
water
> > heater must be rusted out and the leak is coming from below it. Where
> > is the best place to buy one of these heaters and what is the best way
> > to remove it? It looks like it is going to be quite a chore to get it
> > out of there.
> >
> > Robert Rahn
> > Kalispell, Mt.
> > 1988 PT 40
> >
> >
> >
>
>
>
> --
> Rob, Sue & Merlin Robinson
> 94 WLWB
>
>
> [Non-text portions of this message have been removed]
>