water heater replacment

[Rob Robinson]

Opps sorry Stephen . I didn't know you handled Force Ten

On 14/10/2007, Stephen Birtles wrote:
>
> Or dupreeproducts.com
> Stephen 77fc35
>
> --- In WanderlodgeForum@yahoogroups.com,
> "Rob Robinson"
> wrote:
> >
> > When I had to replace my Seaward I chose a Force Ten because they
> copied the
> > basic Seaward design and improved upon it (larger diameter piping,
> stainless
> > cover). I found the pricing good also. Google Force Ten for sales
> and here's
> > their site address http://www.force10.com/heater.html
> >
> > On 14/10/2007, Robert & Teri Rahn wrote:
> > >
> > > I was able to get back to the water heater and check for leaks.
> It is
> > > not leaking out of the pressure relief valve and there is no
> leaking at
> > > any of the pipes. It is a little wet way back at the corner back there
> > > which must be directly above the hole where the water is dripping out.
> > > I turned the water heater off a few days ago and water is still
> > > dripping slowly out of the hole in the engine compartment. So the
> water
> > > heater must be rusted out and the leak is coming from below it. Where
> > > is the best place to buy one of these heaters and what is the best way
> > > to remove it? It looks like it is going to be quite a chore to get it
> > > out of there.
> > >
> > > Robert Rahn
> > > Kalispell, Mt.
> > > 1988 PT 40
> > >
> > >
> > >
> >
> >
> >
> > --
> > Rob, Sue & Merlin Robinson
> > 94 WLWB
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>



--
Rob, Sue & Merlin Robinson
94 WLWB


[Non-text portions of this message have been removed]