Generator won't shut down - gen. set slide out

[Richard Hayden]

My '81 31' FC had the same problem but it was not the slide track, it was the
air cylinder. That air cylinder can be rebuilt rather inexpensively.

Dick Hayden - '87 PT 38 - Lake Stevens, WA - currently at Imperial LTVA, CA

----- Original Message -----
From: bluebirdsp36
To: WanderlodgeForum@yahoogroups.com
Sent: Friday, November 02, 2007 1:03 PM
Subject: [WanderlodgeForum] Re: Generator won't shut down - gen. set slide out



> Slide issue. The slide is slow and sometimes will not extend, makes
> it difficult to shut her down then . Could this be a solenoid also

I had this problem with my old 79 FC-33. I think you will find the
slide runners and bearings are full of dirt. I used a power washer with
hot water to flush all the old dirty grease and crud out and then used
graphite grease to relube the tracks. It worked great after.

Paul Cunningham
Virginia
90 SP-36





[Non-text portions of this message have been removed]