need photo Onan DKD in a 87 to 89 FC

[birdshill123]

Hi John:

Have you read Bill Pape's excellent file on doing this job? Are you
mechanical? Do you like being dirty? Will your wife let you into the
house covered with soot from the foam. Do you have a good selection of
tools? Mostly what this job requires is perseverance. I will post an
article on my experience with some part #'s and sources for parts. Be
prepared to spend a lot of time . Are you retired? Are you doing this
outside. I would definitely NOT recommend that you try to reinsulate
with the gennie in place. Are you going to remove the rad and fan? When
I took the rad out it was probably the dirtiest rad I have ever seen.
Lots of " slime". Unless yours has been done it will need a recore. Be
prepared to spend at least $1000 for insulation, fans, motors, hoses,
etc. Watch for my " story" in the next few days.

Bruce

1988 FC35