High pressure connection on power steering

[Gardner Yeaw]

Kerry,
Yup, I fought with it for a long while tonight. I finally tied a
piece of wire to the hose below the connector and between the wire,
a lot of explatives and perserverence I finally got it threaded.
Once I had everything installed I used a 1/2 inch drill with a
socket adapter to turn the pump to flush and then prime the system.
It worked very well and when I finally started the engine I did not
have to add any more fluid. The new pump didn't growel at all,
however I will reserve judgement until I have put a few miles on
it.

Gardner
78FC33


--- In WanderlodgeForum@yahoogroups.com, david edwards
wrote:
>
> Gardner:
> Just a heads up. When I replaced the return hose for
> my PS thru those same access panels at the steering
> column, I found it was necessary to use two people.
> The person below was needed to hold the hose at the
> correct angle to thread into the steering box and the
> person above turned the nut on the hose or box.
> I tried for quite a while to do it myself in the
> storage lot until I finally collared a fellow RV'er at
> the lot to help me for 10 minutes.
>
> Kerry
> 82 FC 35
> Denver
>
>
>
_____________________________________________________________________
_______________
> Be a better sports nut! Let your teams follow you
> with Yahoo Mobile. Try it now.
http://mobile.yahoo.com/sports;_ylt=At9_...QtBI7ntAcJ
>