Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wide body exhuast removal
12-05-2007, 13:43
Post: #4
Wide body exhuast removal
I'm sure he'll elaborate on his removal. It would be very interesting if you
put in a temporary straight piece of pipe to see what it would sound like
without a muffler. I hope you do as this could be a major cost and possibly
labour saving DIY

On 05/12/2007, ronmarabito2002 wrote:
>
> Thanks Rob. Frankly, I was thinking of the same thing, but my first
> problem is getting the darn thing out of the hole. Randy has
> responded and said that he and a friend pulled it out, but he hasn't
> said how yet.
>
> R.E. (Ron) Marabito, Dallas, TX 92WB40
>
> --- In WanderlodgeForum@yahoogroups.com,
> "Rob Robinson"
> wrote:
> >
> > Ron the only guy that I know who has replaced this muffler is Randy.
> If I
> > have to do mine we're going to put in a straight pipe with no muffler
> > first to see how loud it is. With a turbo there is a chance that it
> won't be
> > too loud. I did this with a 94 Chev Turbo Diesel PU and it was
> throaty but
> > not obnoxious. We'll see I guess.
> >
> > On 05/12/2007, ronmarabito2002 wrote:
> > >
> > > Hi all:
> > >
> > > Anyone done their own removal and reinstall of exhaust stack in the
> > > chase of a WB coach? I have a 92WB40.
> > >
> > > I have removed the top tip and the top bracket holding the top of
> > > the muffler to the chase. There is another similar bracket at the
> > > bottom of the muffler, which is about 16" up from the bottom of the
> > > chase. Anyone have any idea how to remove these bolts. Also, how
> > > about loosening the clamp on the pipe. I could use a long extension on
> > > the bottom, but what happens when the top nuts start turning. It is
> > > at least 4 feet down from the top of the chase.
> > >
> > > All the elbows are rusted together where they join other pipes.
> > > BB put the wrong kind of tip on top and the rain has gotten in and
> > > rusted everything. The muffler itself looks pretty good.
> > >
> > > I'd love to have a conversation with the *#!*) that designed this
> > > install.
> > >
> > > Any suggestions?
> > >
> > > R.E. (Ron) Marabito, Dallas, tX 92WB40
> > >
> > >
> > >
> >
> >
> >
> > --
> > Rob, Sue & Merlin Robinson
> > 94 WLWB
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>



--
Rob, Sue & Merlin Robinson
94 WLWB


[Non-text portions of this message have been removed]
Quote this message in a reply
Post Reply 


Messages In This Thread
Wide body exhuast removal - ronmarabito2002 - 12-05-2007, 12:20
Wide body exhuast removal - Rob Robinson - 12-05-2007, 12:59
Wide body exhuast removal - ronmarabito2002 - 12-05-2007, 13:32
Wide body exhuast removal - Rob Robinson - 12-05-2007 13:43
Wide body exhuast removal - ronmarabito2002 - 12-05-2007, 14:13
Wide body exhuast removal - Scott Forman - 12-05-2007, 14:13
Wide body exhuast removal - Pete Masterson - 12-05-2007, 14:28
Wide body exhuast removal - Jon - 12-05-2007, 14:31
Wide body exhuast removal - Steve Pfiffner - 12-05-2007, 14:36
Wide body exhuast removal - ronmarabito2002 - 12-05-2007, 17:29
Wide body exhuast removal - ronmarabito2002 - 12-05-2007, 17:36
Wide body exhuast removal - Rob Robinson - 12-05-2007, 17:44
Wide body exhuast removal - erniecarpet@... - 12-05-2007, 19:50



User(s) browsing this thread: 1 Guest(s)