Another compressor problem
|
12-30-2007, 13:35
Post: #8
|
|||
|
|||
Another compressor problem
I believe that older coaches (older than 83' mostly did not have a air
drier-- unless someone added one after the fact. My 81 FC-33SB did not have one, however my friends 83' had one from the factory. I'm sure others may chime in on this, but I do think it was a factory addition around 83. Stephen H 81 FC-33SB Former owner- now looker! Plant City, FL On Dec 30, 2007 8:20 PM, Scott Forman <sforman@...> wrote: > Could be anywhere. On my 82 FC is was just about at the center > (length and width) of the underside. Your coach is older, it may not > have one. The dryer is the thing that makes the "pssshh" sound as it > spits air when the compressor reaches its governed PSI. Follow the > sound. > > Scott > > > --- In WanderlodgeForum@yahoogroups.com > "bubblerboy64" > wrote: > > > > Scott, Where would the air dryer be? I have an little gizmo which > I > > assumed was some kind of filter on the side of the compressor. > Other > > then that I don't know what I am looking for. > > John Heckman > > central Pa > > 1973 FC > > > > > > If you have an air dryer, check the relief valve, sometimes they > > stick > > > open. Often of you cover the outlet on the bottom with the palm > of > > > your hand with the engine running, it will fix itself for that > > trip. > > > If you find this happening, you need new relief valve. > > > > > > Scott Forman > > > 86 PT38 > > > Memphis > > > > > > --- In WanderlodgeForum@yahoogroups.com > "bubblerboy64" > > > wrote: > > > > > > > > Upon trying to take the son-in-law for a turn in the bus I > found > > that > > > > the compressor would not bring the air up to release the > brakes. > > > > Checked and the belt is Ok and the compressors seems to be > > turning > > > Ok. > > > > Is there a solenoid or a switch which activates and deactivates > > the > > > > compressor. I get about 30lbs on the air gauge but no more. > The > > only > > > > other clue is that when the compressor is running normally it > > makes > > > > enough noise that I can hear it and it is not doing that. > Don't > > know > > > > beans about what I am dealing with but any help or suggestions > as > > to > > > > what to look at or for would certainly be appreciated. > > > > > > > > John Heckman > > > > central Pa > > > > 1973 FC converted to 3208 CAT > > > > > > > > > > > > [Non-text portions of this message have been removed] |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Another compressor problem - erniecarpet@... - 12-30-2007, 07:06
Another compressor problem - ebirder2000@... - 12-30-2007, 07:32
Another compressor problem - bubblerboy64 - 12-30-2007, 11:07
Another compressor problem - Scott Forman - 12-30-2007, 11:15
Another compressor problem - bubblerboy64 - 12-30-2007, 11:52
Another compressor problem - Pete Masterson - 12-30-2007, 12:19
Another compressor problem - Scott Forman - 12-30-2007, 13:20
Another compressor problem - Stephen Hare - 12-30-2007 13:35
Another compressor problem - John - 12-30-2007, 14:19
Another compressor problem - Gardner Yeaw - 12-30-2007, 15:38
Another compressor problem - Gregory OConnor - 12-30-2007, 16:25
Another compressor problem - bubblerboy64 - 12-31-2007, 02:11
Another compressor problem - bubblerboy64 - 12-31-2007, 02:36
Another compressor problem - Curt Sprenger - 12-31-2007, 02:47
Another compressor problem - bubblerboy64 - 12-31-2007, 03:03
Another compressor problem - Curt Sprenger - 12-31-2007, 03:16
Another compressor problem - Curt Sprenger - 12-31-2007, 03:22
Another compressor problem - Gardner Yeaw - 12-31-2007, 03:43
Another compressor problem - Gregory OConnor - 12-31-2007, 03:49
Another compressor problem - Pete Masterson - 12-31-2007, 12:09
Another compressor problem - Ryan Wright - 01-03-2008, 11:25
Another compressor problem - Scott Forman - 01-03-2008, 11:32
Another compressor problem - Ryan Wright - 01-03-2008, 11:33
Another compressor problem - Glenn Allen - 01-03-2008, 15:36
Another compressor problem - Ryan Wright - 01-03-2008, 16:46
Another compressor problem - Glenn Allen - 01-03-2008, 17:01
|
User(s) browsing this thread: 3 Guest(s)