Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Now tag axle pressure
01-04-2008, 14:12
Post: #2
Now tag axle pressure
Half way between the 50 and 75 lines. I thought about it after I
typed the post, and the only basis I really have for that
being "normal" is the fact that it is what mine has always read. I
can't say I recall reading or hearing what it is supposed to be.
What is yours?

Scott

--- In WanderlodgeForum@yahoogroups.com, "Jay Darst"
wrote:
>
> Scott,
>
> What does your tag pressure gage read?
>
> Jay Darst
> 85PT40
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Scott Forman" <sforman@>
> wrote:
> >
> > "tag axle pressure reducing valve"
> >
> > Does this control tag ride height? Where is it? I think my tag
is
> > riding high despite the pressure gauge reading ok
> >
> > Scott Forman
> > 86 PT38
> > Memphis
> >
> > --- In WanderlodgeForum@yahoogroups.com, "mbulriss" <mbulriss@>
> > wrote:
> > >
> > > Bird of the Week has been updated.
> > >
> > > Today's example is what a dedicated owner can do. I normally
do
> not
> > > post extra information on the Bird of the Week pictures, but
this
> > one
> > > so impressed me with all the new owner's upgrading in such a
short
> > > time period, that I felt compelled to pass along some of the
> > > information they sent in with the pictures.
> > >
> > > From Glenn's picture submission: "We've had the bird about 6
> months
> > > and are the 3rd owners. I purchased it from an owner in Texas
and
> > > drove it home to Georgia. I'm in the process of getting the bus
> > > reconditioned. I have replaced the hot water heater,
> refrigerator,
> > > front window, holding tank dump valves, battery cables, tag axle
> > > pressure reducing valve, and air dryer. I have replaced the
> seals
> > in
> > > the drive axle and the steer axle. On the steer axle, I have
> > replaced
> > > the wheel bearings, shoes, and drums. I have purchased 3 new
> > Dometic
> > > Penguin low profile A/Cs and a Magnum MS2812 inverter for my
next
> > > projects. Hopefully I will have them installed in a few
months.
> We
> > > love to camp a lot and so I try to schedule my upgrades and
> > > maintenance around our camping schedule."
> > >
> > > Wow, what an impressive to-do list in such a short period.
> Glenn,
> > are
> > > you retired, or when did you have time to camp? Hopefully you
> will
> > > document some of the upcoming projects and post step-by-step
> > pictures
> > > in the Photos section of the forum. I am personally interested
in
> > > knowing more about the A/C project; part numbers, thermostat
> > changes,
> > > wiring changes. Please keep us up-to-date on your projects.
> > >
> > > Thanks to Glenn for his Bird of the Week submission!
> > >
> > > Mike Bulriss
> > > 1991 WB40 "Texas Minivan"
> > > San Antonio, TX - back from South Padre, darn it!!
> > >
> >
>
Quote this message in a reply
Post Reply 


Messages In This Thread
Now tag axle pressure - Jay Darst - 01-04-2008, 13:43
Now tag axle pressure - Scott Forman - 01-04-2008 14:12
Now tag axle pressure - Jay Darst - 01-04-2008, 14:41
Now tag axle pressure - Scott Forman - 01-04-2008, 14:49
Now tag axle pressure - maureyroad - 01-04-2008, 16:53
Now tag axle pressure - Gregory OConnor - 01-04-2008, 17:01
Now tag axle pressure - Curt Sprenger - 01-04-2008, 17:27
Now tag axle pressure - Glenn Allen - 01-04-2008, 18:01
Now tag axle pressure - Pete Masterson - 01-05-2008, 05:24
Now tag axle pressure - Don Bradner - 01-05-2008, 05:33
Now tag axle pressure - Jay Darst - 01-05-2008, 07:38
Now tag axle pressure - Leroy Eckert - 01-05-2008, 10:27
Now tag axle pressure - Leroy Eckert - 01-05-2008, 10:32



User(s) browsing this thread: 1 Guest(s)